03
Feb
Four points to ensure the use effect of small road rollers.
0
- The method of operation is
If the operation method is not in place, it is easy to cause some troubles. Operation, first of all to avoid long-term overload operation. Working on the road and in tough jobsites, spot a smoke machine and downshift immediately. When the road work is transferred, it must be transferred slowly and strictly abide by the operating procedures. Second, if the sound of the machine is found to be wrong during operation, it must be restarted after troubleshooting after the sound stops; various clearance adjustments should be checked frequently.
- The new run-in is good.
Many people think that running-in is to delay time and waste oil, which is really “uneconomical”; some people directly run at high speed, thinking that 2-3 hours of idling running-in is enough. According to experts, running-in is a gradual process, which must start from low speed, low gear, and low load to high speed, high gear, and heavy load. Its purpose is to gradually increase the load under good technical conditions and lubricating conditions to gradually have a rough surface, laying the foundation for normal use of the machine and prolonging its life in the future. Therefore, it is necessary for engineering units to strictly follow the requirements of the specification in terms of use.
- Well maintained
Because the working environment of walk-behind road rollers is not good, maintenance is particularly important. During work, due to mutual friction and vibration of parts, oil, mud, and water are inevitable, worn parts, loose joints, corrosion, and aging conditions will cause equipment to deteriorate.
- Stock it in good way.
Usually, small road rollers should be placed in a dry and ventilated place, and there should be no accumulation of debris. Because small road rollers are small in size, it is relatively convenient to place them, just avoid moisture.
