How to maintain the Master walk-behind roller?

How to maintain the Master walk-behind roller?

It is necessary to regularly check the amount of oil, fuel and hydraulic oil of the walk-behind roller engine and add new oil to the specified oil mark indication scale; regularly check and eliminate oil leakage from various parts of the roller, as well as the blockage of the vibrating wheel vent plug ; Regularly check the visible parts such as the instrument of the walk-behind roller. If the operation of the instrument is found to be abnormal, the operation should be stopped in time, and the equipment should be checked and repaired for problems; Lubricate and inspect sprinkler system nozzles, fittings and filters, and regularly clean walk rollers.

1. Before each operation, check whether the fuel and water are sufficient, check the tightness of the equipment, whether the transmission system and working equipment are normal, and whether the hydraulic system and pipeline are normal.

2. During construction, the basement must be marked with obstacles first, and special personnel should be arranged to guide the construction of the machine to ensure the safety of underground obstacles and mechanical equipment.

3. When driving on the highway, always obey the traffic rules, that is, turn on the headlights and turn signals, and mark the vehicle as a slow-moving vehicle behind; never exceed the speed allowed by the traffic rules, and pay attention to the contact after braking . If the obstacle is so close that the small walk-behind roller is trapped, it should be crushed and run through the obstacle instead of stopping.

4. The operator is forbidden to operate the roller after drinking or smoking.

5. When the machine is idling, the machine should be properly prevented. Prolonged exposure to sunlight or outdoor low temperature environment is strictly prohibited.

6. Before the compaction operation, the throttle controller must be set to speed and then the vibration switch must be turned on.

The service life of the road roller is closely related to the operation process. We must follow the correct operating procedures, thereby reducing the maintenance rate of the machinery and shortening the construction period.